14 Online
2 Member And 12 Guest
Members present at the site
Today Visits : 1900
Yesterday Visits : 5452
All Visits : 516814

Welcome to Electronoobs Q&A, where you can ask questions and receive answers from other members of the community.



Categories


1 like 0 dislike
Hi,

I have built the radio transmitter and receiver based on this tutorial: http://www.electronoobs.com/eng_robotica_tut5_2.php

When I uploaded test code for the receiver I saw these values in serial monitor:

Throttle: 0 Yaw: 127 Pitch:127 Roll:127

When I turned on the transmitter, the values changed to:

Throttle: 255 Yaw: 255 Pitch: 255 Roll: 255

and moving joysticks doesn't change anything, so I thought that something is wrong with the transmitter, and added part of the code, to check the values before sending. After that I still get the same values and joysticks seem to do nothing.

Checked if the joysticks have power.

Anyone knows where the problem can be, or had similar one?
closed with the note: Nvm, turned out that joysticks didnt have power...
in Arduino by (220 points)
closed by

1 Answer

1 like 0 dislike
 
Best answer
Nvm, turned out that joysticks didnt have power...
by (220 points)
selected by
...